Requirements for fire doors


Wooden fire door is made of flame retardant wood or flame retardant wood products as door frame, door frame, door panel, if the door leaf is filled with material, it is filled with non-toxic and harmless fire insulation material to the human body, and it is equipped with fire hardware fittings.
The overlapping size of the door leaf and the door frame shall not be less than 12mm; the matching clearance between the hinge side of the door leaf and the door frame shall not be greater than the dimensional tolerance specified in the design drawing; the matching clearance between the locked side of the door leaf and the door frame shall not be greater than the dimensional tolerance specified in the design drawing; the matching clearance between the door leaf and the upper frame shall not be greater than 3mm; the gap between the double and multi-leaf doors shall not be greater than 3mm; the movable clearance between the door leaf and the lower frame or the ground shall not be greater than 9mm mm; Gap between the door leaf and the door frame: the gap between the hinge side, the lock side and the upper frame shall not be greater than 3mm mm; The plane height difference between the door leaf and the door frame: on the opening surface of the fire door, the plane height difference between the door frame of Tianjin telescopic bar code reader and the door leaf shall not be greater than 1mm.
Wood fire door refers to the use of wood or wood products to make the door frame, door frame, door panel, fire resistance limit to meet the national requirements of the door. Some small deviations between wooden fire doors can not be wrong, perhaps it is a small detail problem, it may not meet the national standards.
Use of materials
First of all, compare the use of materials, fire door structure is simple, mainly composed of four parts: door closer, door panel material (06 and 08, etc.), door frame material, fire board composition. Class A fire doors generally use good quality 08 material, the normal service life in 5-8 years, the door of the iron is thicker, the same thickness of the fire door, the weight of the class A fire door is greater than the class B fire door.
Fire prevention time
The fire time of the fire door is mainly determined by the fire board. In this regard, the fire board used in the fire door of Class A is generally better than the performance of the fire board used in the fire door of Class B, so the overall performance is stronger than that of the fire door of Class B. In addition, Class A fire doors are especially suitable for occasions that require fine grinding before electroplating, excellent vibration, mirror polishing of hand tools, mirror polishing of electric heating tubes, etc., such as vibration of various furniture hardware accessories, cutting and polishing of hand tools, daily products, surface vibration of self-painting accessories, etc.
Another point of concern is that the materials with door frame function in Class A fire doors are more convenient, labor-saving and time-saving when designing the door opening size because the specifications of the door frame can be flexibly customized according to the needs of customers.
Cost of use
Although in terms of procurement costs, Class A fire doors are higher than Class B fire doors, but in terms of comprehensive use costs, Class A fire doors are better than Class B fire doors in many ways. However, Class B fire doors also have the characteristics of low price, but also occupy a part of the low-end market.
A clever woman cannot cook without rice. Rice is also divided into good rice and bad rice. Manufacturers refuse to use "good rice" and naturally cannot produce fire doors with reliable quality. This is worth thinking about by Chinese enterprises.

Related News


Solution participated in the 14th Nuclear Power Frontier Summit Forum and New Unit Conference

This summit forum is jointly organized by the National Nuclear Instrumentation and Control Industry Technology Innovation Strategic Alliance and Shanghai Yingzhi Business Consulting Co., Ltd., China Nuclear (Shanghai) Supply Chain Management Co., Ltd. as a permanent director unit, Shanghai Nuclear Engineering Research and Design Institute Co., Ltd., China Nuclear Power Engineering Co., Ltd., and Nuclear Energy Materials Industry Development Alliance as co-organizers, and China National Nuclear Demonstration Power Station Co., Ltd., CGN Huizhou Nuclear Power Co., Ltd., Shandong Nuclear Power Co., Ltd., China National Nuclear Energy Technology Co., Ltd., Fujian Ningde Nuclear Power Co., Ltd., CGN Cangnan Nuclear Power Co., Ltd., CGN Lufeng Nuclear Power Co., Ltd., Huaneng Hainan Changjiang Nuclear Power Co., Ltd., China Nuclear Industry 23 Construction Co., Ltd., China Nuclear Industry 22 Construction Co., Ltd., Guizhou Yuping Clean Thermal Energy Co., Ltd., Green Energy Technology (China National Nuclear Power Institute), China Electric Power Engineering Consulting Group East China Electric Power Design Institute Co., Ltd., and Beijing Guangli Nuclear System Engineering Co., Ltd. as supporting units.


Solution participated in the 140th anniversary celebration series of the First Affiliated Hospital of Soochow University

Under the guidance of the Hospital Architecture and Equipment Branch of the China Medical Equipment Association and the Hospital Architecture and Planning Management Professional Committee of the Jiangsu Hospital Association, and co-organized by the First Affiliated Hospital of Soochow University and Zhuyitai, the "140th Anniversary Celebration Series of the First Affiliated Hospital of Soochow University and the Intelligent One-Stop Emergency Center Construction Seminar" will be held in Suzhou, Jiangsu from November 9 to 10, 2023. The conference will focus on the planning and medical process design of emergency medical care, BIM+full-process project management, 5G+AI+IoT integrated applications, and hospital intelligent operating department system construction and other innovative aspects, presenting a stage for academic exchanges and collisions of ideas for colleagues.


Warmly congratulate the company on becoming a qualified supplier in China's nuclear energy industry.

According to the China Nuclear Energy Industry Association (hereinafter referred to as the Association) nuclear energy industry qualified supplier evaluation standards and procedures, Jiangsu Huicong Air Conditioning Equipment Co., Ltd. and other 107 suppliers passed the Association's nuclear energy industry qualified supplier evaluation. After examination and approval by the Supplier Evaluation Committee of the Association, the List of the 19th Batch of Qualified Suppliers in the Nuclear Energy Industry is hereby issued.


Steel hospital ward door how to choose?

Hospital wards are places with high requirements for cleanliness. Rectangular and square observation windows have 4 90-degree angles, which are easy to form clean dead corners, while circular observation windows have no clean dead corners and are easier to clean.


Requirements for fire doors

Wooden fire door is made of flame retardant wood or flame retardant wood products as door frame, door frame, door panel, if the door leaf is filled with material, it is filled with non-toxic and harmless fire insulation material to the human body, and it is equipped with fire hardware fittings.


How to distinguish steel doors

First of all, when purchasing anti-theft safety doors, it is necessary to certify the dealer's business qualifications to see whether the operator holds the "anti-theft safety door certification" issued by the technical defense management department of the Public Security Bureau ". Secondly, pay attention to careful inspection, qualified anti-theft door frame steel plate thickness should be more than 2mm, the thickness of the door body is generally more than 20mm, the weight of the door is generally more than 40kg. Third, when purchasing anti-theft security doors, pay attention to check whether the national certification standard "FAM" is printed on the anti-theft door, and you can also ask the dealer to provide the national anti-theft security door inspection report of the brand anti-theft door. If not national inspection

< 123 >